Truma Combi 6E Heater & Boiler with iNet Ready CP+ Panel

The Truma Combi 6E combines powerful space heating and hot water in one compact system for campervans, motorhomes and caravans. It can operate using gas, 230V electricity or a combination of both.

The integrated 10-litre water tank means you do not need a separate campervan water heater. Water can also be heated independently during warmer weather, without heating the living space.

Truma Combi 6E Heating and Hot Water

The Truma Combi 6E heater provides three gas output levels of 2,000W, 4,000W and 6,000W. Electric operation provides either 900W or 1,800W. In mixed mode, the maximum heat output increases to 6,900W.

Warm air is distributed through four outlets, with a maximum free-blowing airflow of 287m³/h. This makes the Truma Combi heater particularly suited to larger leisure vehicles where effective heating is important.

The supplied CP Plus iNet Ready control panel provides convenient digital control of the system. This campervan gas heater also offers flexible operation when travelling or staying on a campsite with a 230V hook-up.

Key Features

• Combined space heating and hot water system
• 10-litre integrated water tank
• Gas, electric and mixed-mode operation
• Up to 6,000W output in gas mode
• 900W or 1,800W electric heating
• Up to 6,900W output in mixed mode
• Four warm-air outlets
• Maximum airflow of 287m³/h
• CP Plus iNet Ready digital control panel
• Compact design for leisure vehicles

Specifications

• Brand: Truma
• Model: Combi 6E
• Manufacturer Part Number: 33813-80MB/L
• EAN: 4052816005744
• Energy Sources: Propane / butane and electricity
• Operating Pressure: 30mbar
• Gas Heat Output: 2,000W / 4,000W / 6,000W
• Electric Heat Output: 900W / 1,800W
• Mixed-Mode Output: Maximum 6,900W
• Gas Consumption: 160–460g/h
• Water Capacity: 10 litres
• Maximum Airflow: 287m³/h
• Dimensions: 510 × 450 × 300mm
• Installation Dimensions: 540 × 500 × 350mm minimum
• Weight: Approx. 15.5kg

What's Included

• Truma Combi 6E heater and boiler
• CP Plus iNet Ready control panel
• 6m control panel cable
• Room thermostat
• Fastening components
• FrostControl safety/drain valve
• Elbow fitting for 10mm water hose

Please Note

Warm-air ducting and outlets are sold separately. Additional installation components may also be required depending on your vehicle and installation.

The system should be installed in accordance with Truma's installation instructions.